IKO PHSB4 Rod end joint
Also known as : PHSB4
- Inside Diameter: 6.35 mm
- Outside Diameter: 19.05 mm
- Width: 42.85 mm
- Basic dynamic load rating: 4.59 kN
- Basic static load rating: 13.2 kN
IKO PHSB4
IKO PHSB4 details
| Identification number | PHSB4 |
|---|---|
| Type | Inch series PILLOBALL Rod ends |
| Mass | 23 g |
| d | 6.35 mm |
| Thread S | -28UNF |
| D | 19.05 mm |
| B | 7.14 mm |
| B1 | 9.53 mm |
| d1 | 9.02 mm |
| L | 42.85 mm |
| l | 4.75 mm |
| L1 | 33.32 mm |
| L2 | 19.05 mm |
| W | 9.53 mm |
| D1 | 9.53 mm |
| D2 | 11.89 mm |
| rs min | 0.5 mm |
| Ball dia. | 13.097 mm |
| Dynamic load capacity | 4.59 kN |
| Static load capacity | 13.2 kN |
IKO PHSB4 bearing cross reference
GAL40-UK-2RS
6.35 mmx 19.05 mmx42.85 mm
GAR70-DO-2RS
6.35 mmx 19.05 mmx42.85 mm
GAR40-DO-2RS
6.35 mmx 19.05 mmx42.85 mm
GAL45-DO-2RS
6.35 mmx 19.05 mmx42.85 mm
GAL35-DO-2RS
6.35 mmx 19.05 mmx42.85 mm
GAR17-UK
6.35 mmx 19.05 mmx42.85 mm
GAR12-UK
6.35 mmx 19.05 mmx42.85 mm
GAR6-UK
6.35 mmx 19.05 mmx42.85 mm
GAL30-UK
6.35 mmx 19.05 mmx42.85 mm
GAL12-UK
6.35 mmx 19.05 mmx42.85 mm
GAL6-UK
6.35 mmx 19.05 mmx42.85 mm
