FAG HSS71911-C-T-P4S Angular contact ball bearings
Also known as : HSS71911-C-T-P4S
- Inside Diameter: 55 mm
- Outside Diameter: 80 mm
- Width: 13 mm
- Basic dynamic load rating: 13 kN
- Basic static load rating: 8.5 kN
FAG HSS71911-C-T-P4S
FAG HSS71911-C-T-P4S details
| Number | HSS71911-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances | |
| d | 55 mm | |
| D | 80 mm | |
| B | 13 mm | |
| a | 15,5 mm | |
| Da | 75,5 mm | Tolerance: H12 |
| da | 60 mm | Tolerance: h12 |
| r1 min | 1 mm | |
| ra max | 0,6 mm | |
| ra1 max | 0,3 mm | |
| rmin | 1 mm | |
| α | 15 ° | Contact angle |
| m | 0,218 kg | ≈ Mass |
| Cr | 13000 N | Basic dynamic load rating, radial |
| C0r | 8500 N | Basic static load rating, radial |
| Cur | 870 N | Fatigue limit load, radial |
| nG Fett | 24000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 45 N | Preload force |
| FV M | 135 N | Preload force |
| FV H | 269 N | Preload force |
| KaE L | 135 N | Lift-off force |
| KaE M | 424 N | Lift-off force |
| KaE H | 882 N | Lift-off force |
| ca L | 37,3 N/µm | Axial rigidity |
| ca M | 58,6 N/µm | Axial rigidity |
| ca H | 80,3 N/µm | Axial rigidity |
FAG HSS71911-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
55 mmx 80 mmx 13 mm
3806-B-2RS-TVH
55 mmx 80 mmx 13 mm
3801-B-2RS-TVH
55 mmx 80 mmx 13 mm
3217-B-2RS-TVH
55 mmx 80 mmx 13 mm
3313-BD-XL
55 mmx 80 mmx 13 mm
3311-BD-XL
55 mmx 80 mmx 13 mm
3310-BD-XL-TVH
55 mmx 80 mmx 13 mm
3310-BD-XL
55 mmx 80 mmx 13 mm
3309-BD-XL
55 mmx 80 mmx 13 mm
3307-BD-XL
55 mmx 80 mmx 13 mm
3306-BD-XL
55 mmx 80 mmx 13 mm
