FAG HS71909-E-T-P4S Angular contact ball bearings
Also known as : HS71909-E-T-P4S
- Inside Diameter: 45 mm
- Outside Diameter: 68 mm
- Width: 12 mm
- Basic dynamic load rating: 9.1 kN
- Basic static load rating: 5.6 kN
FAG HS71909-E-T-P4S
FAG HS71909-E-T-P4S details
| Number | HS71909-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances | |
| d | 45 mm | |
| D | 68 mm | |
| B | 12 mm | |
| a | 19,2 mm | |
| Da | 63,5 mm | Tolerance: H12 |
| da | 50 mm | Tolerance: h12 |
| Etk max | 54,7 mm | |
| Etk min | 53,7 mm | |
| Etk1 max | 54,7 mm | |
| Etk1 min | 51,9 mm | |
| r1 min | 0,6 mm | |
| ra max | 0,6 mm | |
| ra1 max | 0,15 mm | |
| rmin | 0,6 mm | |
| α | 25 ° | Contact angle |
| m | 0,136 kg | ≈ Mass |
| Cr | 9100 N | Basic dynamic load rating, radial |
| C0r | 5600 N | Basic static load rating, radial |
| Cur | 580 N | Fatigue limit load, radial |
| nG Fett | 26000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 40000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 55 N | Preload force |
| FV M | 164 N | Preload force |
| FV H | 328 N | Preload force |
| KaE L | 158 N | Lift-off force |
| KaE M | 482 N | Lift-off force |
| KaE H | 984 N | Lift-off force |
| ca L | 77,2 N/µm | Axial rigidity |
| ca M | 115 N/µm | Axial rigidity |
| ca H | 150 N/µm | Axial rigidity |
FAG HS71909-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
45 mmx 68 mmx 12 mm
3806-B-2RS-TVH
45 mmx 68 mmx 12 mm
3801-B-2RS-TVH
45 mmx 68 mmx 12 mm
3217-B-2RS-TVH
45 mmx 68 mmx 12 mm
3313-BD-XL
45 mmx 68 mmx 12 mm
3311-BD-XL
45 mmx 68 mmx 12 mm
3310-BD-XL-TVH
45 mmx 68 mmx 12 mm
3310-BD-XL
45 mmx 68 mmx 12 mm
3309-BD-XL
45 mmx 68 mmx 12 mm
3307-BD-XL
45 mmx 68 mmx 12 mm
3306-BD-XL
45 mmx 68 mmx 12 mm
