FAG HS7022-E-T-P4S Angular contact ball bearings
Also known as : HS7022-E-T-P4S
- Inside Diameter: 110 mm
- Outside Diameter: 170 mm
- Width: 28 mm
- Basic dynamic load rating: 45.5 kN
- Basic static load rating: 35.5 kN
FAG HS7022-E-T-P4S
FAG HS7022-E-T-P4S details
| Number | HS7022-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances | |
| d | 110 mm | |
| D | 170 mm | |
| B | 28 mm | |
| a | 46,6 mm | |
| Da | 159 mm | Tolerance: H12 |
| da | 121 mm | Tolerance: h12 |
| Etk max | 136,5 mm | |
| Etk min | 133,3 mm | |
| Etk1 max | 136,5 mm | |
| Etk1 min | 129,2 mm | |
| r1 min | 2 mm | |
| ra max | 2 mm | |
| ra1 max | 1 mm | |
| rmin | 2 mm | |
| α | 25 ° | Contact angle |
| m | 2,17 kg | ≈ Mass |
| Cr | 45500 N | Basic dynamic load rating, radial |
| C0r | 35500 N | Basic static load rating, radial |
| Cur | 3100 N | Fatigue limit load, radial |
| nG Fett | 11000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 16000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 267 N | Preload force |
| FV M | 802 N | Preload force |
| FV H | 1604 N | Preload force |
| KaE L | 770 N | Lift-off force |
| KaE M | 2352 N | Lift-off force |
| KaE H | 4792 N | Lift-off force |
| ca L | 193 N/µm | Axial rigidity |
| ca M | 287 N/µm | Axial rigidity |
| ca H | 373 N/µm | Axial rigidity |
FAG HS7022-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
110 mmx 170 mmx 28 mm
3806-B-2RS-TVH
110 mmx 170 mmx 28 mm
3801-B-2RS-TVH
110 mmx 170 mmx 28 mm
3217-B-2RS-TVH
110 mmx 170 mmx 28 mm
3313-BD-XL
110 mmx 170 mmx 28 mm
3311-BD-XL
110 mmx 170 mmx 28 mm
3310-BD-XL-TVH
110 mmx 170 mmx 28 mm
3310-BD-XL
110 mmx 170 mmx 28 mm
3309-BD-XL
110 mmx 170 mmx 28 mm
3307-BD-XL
110 mmx 170 mmx 28 mm
3306-BD-XL
110 mmx 170 mmx 28 mm
