FAG HS7011-E-T-P4S Angular contact ball bearings
Also known as : HS7011-E-T-P4S
- Inside Diameter: 55 mm
- Outside Diameter: 90 mm
- Width: 18 mm
- Basic dynamic load rating: 16.9 kN
- Basic static load rating: 10.9 kN
FAG HS7011-E-T-P4S
FAG HS7011-E-T-P4S details
| Number | HS7011-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances | |
| d | 55 mm | |
| D | 90 mm | |
| B | 18 mm | |
| a | 25,9 mm | |
| Da | 83 mm | Tolerance: H12 |
| da | 62 mm | Tolerance: h12 |
| Etk max | 70,3 mm | |
| Etk min | 68,5 mm | |
| Etk1 max | 70,3 mm | |
| Etk1 min | 65,9 mm | |
| r1 min | 1,1 mm | |
| ra max | 1 mm | |
| ra1 max | 0,6 mm | |
| rmin | 1,1 mm | |
| α | 25 ° | Contact angle |
| m | 0,404 kg | ≈ Mass |
| Cr | 16900 N | Basic dynamic load rating, radial |
| C0r | 10900 N | Basic static load rating, radial |
| Cur | 1120 N | Fatigue limit load, radial |
| nG Fett | 20000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 30000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 101 N | Preload force |
| FV M | 304 N | Preload force |
| FV H | 607 N | Preload force |
| KaE L | 292 N | Lift-off force |
| KaE M | 895 N | Lift-off force |
| KaE H | 1826 N | Lift-off force |
| ca L | 106 N/µm | Axial rigidity |
| ca M | 157 N/µm | Axial rigidity |
| ca H | 206 N/µm | Axial rigidity |
FAG HS7011-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
55 mmx 90 mmx 18 mm
3806-B-2RS-TVH
55 mmx 90 mmx 18 mm
3801-B-2RS-TVH
55 mmx 90 mmx 18 mm
3217-B-2RS-TVH
55 mmx 90 mmx 18 mm
3313-BD-XL
55 mmx 90 mmx 18 mm
3311-BD-XL
55 mmx 90 mmx 18 mm
3310-BD-XL-TVH
55 mmx 90 mmx 18 mm
3310-BD-XL
55 mmx 90 mmx 18 mm
3309-BD-XL
55 mmx 90 mmx 18 mm
3307-BD-XL
55 mmx 90 mmx 18 mm
3306-BD-XL
55 mmx 90 mmx 18 mm
