FAG HS7004-C-T-P4S Angular contact ball bearings
Also known as : HS7004-C-T-P4S
- Inside Diameter: 20 mm
- Outside Diameter: 42 mm
- Width: 12 mm
- Basic dynamic load rating: 5.7 kN
- Basic static load rating: 2.7 kN
FAG HS7004-C-T-P4S
FAG HS7004-C-T-P4S details
| Number | HS7004-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances | |
| d | 20 mm | |
| D | 42 mm | |
| B | 12 mm | |
| a | 10,2 mm | |
| Da | 37 mm | Tolerance: H12 |
| da | 25 mm | Tolerance: h12 |
| Etk max | 29,7 mm | |
| Etk min | 28,6 mm | |
| Etk1 max | 29,7 mm | |
| Etk1 min | 27,1 mm | |
| r1 min | 0,6 mm | |
| ra max | 0,6 mm | |
| ra1 max | 0,3 mm | |
| rmin | 0,6 mm | |
| α | 15 ° | Contact angle |
| m | 0,077 kg | ≈ Mass |
| Cr | 5700 N | Basic dynamic load rating, radial |
| C0r | 2700 N | Basic static load rating, radial |
| Cur | 280 N | Fatigue limit load, radial |
| nG Fett | 53000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 80000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 21 N | Preload force |
| FV M | 62 N | Preload force |
| FV H | 125 N | Preload force |
| KaE L | 63 N | Lift-off force |
| KaE M | 198 N | Lift-off force |
| KaE H | 413 N | Lift-off force |
| ca L | 19,8 N/µm | Axial rigidity |
| ca M | 31,5 N/µm | Axial rigidity |
| ca H | 43,5 N/µm | Axial rigidity |
FAG HS7004-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
20 mmx 42 mmx 12 mm
3806-B-2RS-TVH
20 mmx 42 mmx 12 mm
3801-B-2RS-TVH
20 mmx 42 mmx 12 mm
3217-B-2RS-TVH
20 mmx 42 mmx 12 mm
3313-BD-XL
20 mmx 42 mmx 12 mm
3311-BD-XL
20 mmx 42 mmx 12 mm
3310-BD-XL-TVH
20 mmx 42 mmx 12 mm
3310-BD-XL
20 mmx 42 mmx 12 mm
3309-BD-XL
20 mmx 42 mmx 12 mm
3307-BD-XL
20 mmx 42 mmx 12 mm
3306-BD-XL
20 mmx 42 mmx 12 mm
