FAG HS7026-E-T-P4S Angular contact ball bearings
Also known as : HS7026-E-T-P4S
- Inside Diameter: 130 mm
- Outside Diameter: 200 mm
- Width: 33 mm
- Basic dynamic load rating: 60 kN
- Basic static load rating: 50 kN
FAG HS7026-E-T-P4S
FAG HS7026-E-T-P4S details
| Number | HS7026-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances |
|
| d | 130 mm | |
| D | 200 mm | |
| B | 33 mm | |
| a | 55 mm | |
| Da | 189 mm | Tolerance: H12 |
| da | 142 mm | Tolerance: h12 |
| Etk max | 161,2 mm | |
| Etk min | 157,4 mm | |
| Etk1 max | 161,2 mm | |
| Etk1 min | 152,6 mm | |
| r1 min | 2 mm | |
| ra max | 2 mm | |
| ra1 max | 1 mm | |
| rmin | 2 mm | |
| α | 25 ° | Contact angle |
| m | 3,51 kg | ≈ Mass |
| Cr | 60000 N | Basic dynamic load rating, radial |
| C0r | 50000 N | Basic static load rating, radial |
| Cur | 4000 N | Fatigue limit load, radial |
| nG Fett | 8500 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 13000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 357 N | Preload force |
| FV M | 1070 N | Preload force |
| FV H | 2139 N | Preload force |
| KaE L | 1026 N | Lift-off force |
| KaE M | 3133 N | Lift-off force |
| KaE H | 6381 N | Lift-off force |
| ca L | 231 N/µm | Axial rigidity |
| ca M | 344 N/µm | Axial rigidity |
| ca H | 446 N/µm | Axial rigidity |
FAG HS7026-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
130 mmx 200 mmx 33 mm
3806-B-2RS-TVH
130 mmx 200 mmx 33 mm
3801-B-2RS-TVH
130 mmx 200 mmx 33 mm
3217-B-2RS-TVH
130 mmx 200 mmx 33 mm
3313-BD-XL
130 mmx 200 mmx 33 mm
3311-BD-XL
130 mmx 200 mmx 33 mm
3310-BD-XL-TVH
130 mmx 200 mmx 33 mm
3310-BD-XL
130 mmx 200 mmx 33 mm
3309-BD-XL
130 mmx 200 mmx 33 mm
3307-BD-XL
130 mmx 200 mmx 33 mm
3306-BD-XL
130 mmx 200 mmx 33 mm
