FAG HS7021-E-T-P4S Angular contact ball bearings
Also known as : HS7021-E-T-P4S
- Inside Diameter: 105 mm
- Outside Diameter: 160 mm
- Width: 26 mm
- Basic dynamic load rating: 45 kN
- Basic static load rating: 34.5 kN
FAG HS7021-E-T-P4S
FAG HS7021-E-T-P4S details
| Number | HS7021-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances |
|
| d | 105 mm | |
| D | 160 mm | |
| B | 26 mm | |
| a | 43,9 mm | |
| Da | 150 mm | Tolerance: H12 |
| da | 116 mm | Tolerance: h12 |
| Etk max | 129 mm | |
| Etk min | 125,8 mm | |
| Etk1 max | 129 mm | |
| Etk1 min | 121,7 mm | |
| r1 min | 2 mm | |
| ra max | 2 mm | |
| ra1 max | 1 mm | |
| rmin | 2 mm | |
| α | 25 ° | Contact angle |
| m | 1,7 kg | ≈ Mass |
| Cr | 45000 N | Basic dynamic load rating, radial |
| C0r | 34500 N | Basic static load rating, radial |
| Cur | 3050 N | Fatigue limit load, radial |
| nG Fett | 11000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 16000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 267 N | Preload force |
| FV M | 802 N | Preload force |
| FV H | 1604 N | Preload force |
| KaE L | 770 N | Lift-off force |
| KaE M | 2354 N | Lift-off force |
| KaE H | 4797 N | Lift-off force |
| ca L | 189 N/µm | Axial rigidity |
| ca M | 281 N/µm | Axial rigidity |
| ca H | 365 N/µm | Axial rigidity |
FAG HS7021-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
105 mmx 160 mmx 26 mm
3806-B-2RS-TVH
105 mmx 160 mmx 26 mm
3801-B-2RS-TVH
105 mmx 160 mmx 26 mm
3217-B-2RS-TVH
105 mmx 160 mmx 26 mm
3313-BD-XL
105 mmx 160 mmx 26 mm
3311-BD-XL
105 mmx 160 mmx 26 mm
3310-BD-XL-TVH
105 mmx 160 mmx 26 mm
3310-BD-XL
105 mmx 160 mmx 26 mm
3309-BD-XL
105 mmx 160 mmx 26 mm
3307-BD-XL
105 mmx 160 mmx 26 mm
3306-BD-XL
105 mmx 160 mmx 26 mm
