FAG HS7006-E-T-P4S Angular contact ball bearings
Also known as : HS7006-E-T-P4S
- Inside Diameter: 30 mm
- Outside Diameter: 55 mm
- Width: 13 mm
- Basic dynamic load rating: 7.8 kN
- Basic static load rating: 4.05 kN
FAG HS7006-E-T-P4S
FAG HS7006-E-T-P4S details
| Number | HS7006-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances |
|
| d | 30 mm | |
| D | 55 mm | |
| B | 13 mm | |
| a | 16,4 mm | |
| Da | 49 mm | Tolerance: H12 |
| da | 36 mm | Tolerance: h12 |
| Etk max | 40,9 mm | |
| Etk min | 39,7 mm | |
| Etk1 max | 40,9 mm | |
| Etk1 min | 37,9 mm | |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 0,3 mm | |
| rmin | 1 mm | |
| α | 25 ° | Contact angle |
| m | 0,124 kg | ≈ Mass |
| Cr | 7800 N | Basic dynamic load rating, radial |
| C0r | 4050 N | Basic static load rating, radial |
| Cur | 415 N | Fatigue limit load, radial |
| nG Fett | 34000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 53000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 48 N | Preload force |
| FV M | 143 N | Preload force |
| FV H | 286 N | Preload force |
| KaE L | 138 N | Lift-off force |
| KaE M | 423 N | Lift-off force |
| KaE H | 865 N | Lift-off force |
| ca L | 60,6 N/µm | Axial rigidity |
| ca M | 90,6 N/µm | Axial rigidity |
| ca H | 119 N/µm | Axial rigidity |
FAG HS7006-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
30 mmx 55 mmx 13 mm
3806-B-2RS-TVH
30 mmx 55 mmx 13 mm
3801-B-2RS-TVH
30 mmx 55 mmx 13 mm
3217-B-2RS-TVH
30 mmx 55 mmx 13 mm
3313-BD-XL
30 mmx 55 mmx 13 mm
3311-BD-XL
30 mmx 55 mmx 13 mm
3310-BD-XL-TVH
30 mmx 55 mmx 13 mm
3310-BD-XL
30 mmx 55 mmx 13 mm
3309-BD-XL
30 mmx 55 mmx 13 mm
3307-BD-XL
30 mmx 55 mmx 13 mm
3306-BD-XL
30 mmx 55 mmx 13 mm
