FAG HSS7014-E-T-P4S Angular contact ball bearings
Also known as : HSS7014-E-T-P4S
- Inside Diameter: 70 mm
- Outside Diameter: 110 mm
- Width: 20 mm
- Basic dynamic load rating: 23.6 kN
- Basic static load rating: 16.3 kN
FAG HSS7014-E-T-P4S
FAG HSS7014-E-T-P4S details
| Number | HSS7014-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 70 mm | |
| D | 110 mm | |
| B | 20 mm | |
| a | 31 mm | |
| Da | 102 mm | Tolerance: H12 |
| da | 77 mm | Tolerance: h12 |
| r1 min | 1,1 mm | |
| ra max | 1 mm | |
| ra1 max | 0,6 mm | |
| rmin | 1,1 mm | |
| α | 25 ° | Contact angle |
| m | 0,702 kg | ≈ Mass |
| Cr | 23600 N | Basic dynamic load rating, radial |
| C0r | 16300 N | Basic static load rating, radial |
| Cur | 1670 N | Fatigue limit load, radial |
| nG Fett | 16000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 141 N | Preload force |
| FV M | 423 N | Preload force |
| FV H | 845 N | Preload force |
| KaE L | 406 N | Lift-off force |
| KaE M | 1243 N | Lift-off force |
| KaE H | 2536 N | Lift-off force |
| ca L | 131 N/µm | Axial rigidity |
| ca M | 194 N/µm | Axial rigidity |
| ca H | 253 N/µm | Axial rigidity |
FAG HSS7014-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
70 mmx 110 mmx 20 mm
3806-B-2RS-TVH
70 mmx 110 mmx 20 mm
3801-B-2RS-TVH
70 mmx 110 mmx 20 mm
3217-B-2RS-TVH
70 mmx 110 mmx 20 mm
3313-BD-XL
70 mmx 110 mmx 20 mm
3311-BD-XL
70 mmx 110 mmx 20 mm
3310-BD-XL-TVH
70 mmx 110 mmx 20 mm
3310-BD-XL
70 mmx 110 mmx 20 mm
3309-BD-XL
70 mmx 110 mmx 20 mm
3307-BD-XL
70 mmx 110 mmx 20 mm
3306-BD-XL
70 mmx 110 mmx 20 mm
