INA ZKLN0624-2RS-XL Thrust ball bearings
Also known as : ZKLN0624-2RS-XL
- Inside Diameter: 6 mm
- Outside Diameter: 24 mm
- Width: 15 mm
- Basic dynamic load rating: 7.6 kN
- Basic static load rating: 8.5 kN
INA ZKLN0624-2RS-XL
INA ZKLN0624-2RS-XL details
| Number | ZKLN0624-2RS-XL | |
|---|---|---|
| Type |
Axial angular contact ball bearings double direction, lip seals on both sides |
|
| d | 6mm | Tolerance: +0,002/-0,003 |
| D | 24mm | Tolerance: 0/-0,010 |
| B | 15mm | Tolerance: 0/-0,25 |
| 60° | Contact angle | |
| Da max | 19mm | |
| d1 | 14mm | |
| da min | 9mm | |
| r1 min | 0,6mm | |
| rmin | 0,3mm | |
| m | 0,03kg | ≈ Mass |
| Ca | 7600N | Basic dynamic load rating, axial |
| C0a | 8500N | Basic static load rating, axial |
| Cua | 520N | Fatigue limit load, axial |
| nG Fett | 164001/min | Limiting speed for grease lubrication |
| nϑ | 68001/min | Thermally safe operating speed |
| MRL | 0,04Nm | Bearing frictional torque |
| caL | 200N/µm | Axial rigidity |
| ckL | 8Nm/mrad | Tilting rigidity |
| Mm | 0,0044kg * cm^2 | Mass moment of inertia for rotating inner ring |
| 2µm |
Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring. |
|
| ZM06 |
Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately. |
|
| MA | 2Nm |
Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements. |
| 2404N |
Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts. |
